TIFA 100E Fogging Machine

  +603 8061 8346
  kemuncak56@gmail.com

 

Your preferred choice for the most effective vector control program to treat up to 2500 acres per day.

TECHNICAL SPECIFICATIONS OF TIFA POWER FOGGER MODEL 100E

Product Description

A Machine Beyond Compare!

  • Unit is operated by 13 HP gasoline, 4 cycle, single cylinder air cooled internal combustion engine.
  • Unit is equipped with finely machined heavy duty turbine blower to produce air up to 200 km/hr to fully protect the active ingredient of pesticide from any degradation or burning up.
  • The fog head, made of cast iron, attached to the machine has mobility of 360 degrees horizontally and vertically and all the internal parts of the fog head are stainless steel.
  • A remote control device is available to run the machine from the inside of a vehicles cab.
  • 12 volt dry car battery is equipped with the machine for independent operation.
  • Five major spraying techniques are effectively produced. See back page.
  • Machine is equipped with a particle size selector valve which controls both the droplet size and flow rate (1-55 gal/hr) (3.78 – 200 lit/hr).
  • Machine is equipped with a fuel pump, insecticide pump, two pressure gauges, pyrometer and tachometer a heavy duty metal fuel gauge and hour meter as well as ammeter which are located on the panel board.
  • An insulated fog hose, clamp and bracket are available and can be connected to the machine for sewer treatments and indoor application.
  • A formulation suction and return manifold line can be inserted into a variety of chemical tanks ranging in capabilities from 5 gallons to 500 gallons (20 liters to 2,000) or more.
  • Fuel tank capacity is 16 gallons (60 liters).
  • Dimensions of the unit are length 35” (87.5cm) x width 33” (82.5cm) x height 39” (97.5cm). Net weight of unit empty 575.5 pounds (261kg).
  • Cold Fogging / Aerosol Technique 20 – 200 Microns Droplet Size
  • Ultra Low Volume (ULV) Technique 10 – 150 Microns Droplet Size
  • Thermal Fogging Technique 1- 50 Microns Droplet Size
  • Larvaciding / Residual Spraying Technique 100 – 300 Microns Droplet Size
  • Conventional / High Volume Spraying Technique 100 – 500 Microns Droplet Size